Adapt-A-Gap System

The Primary Sales Adapt-A-Gap Crop Finger System

The Nylon Extension fingers clip onto the Adapt-A-Gap range of knife guards allowing compression of light crops when cutting as well as collection and feeding of stray grains and pods reducing crop losses.

 

If your Harvester Fronts WORKING POSITION is NOSE DOWN then the Standard BLUE single Extension Finger is suitable as it is raised up at the nose so that when it is mounted on the Adapt-A-Gap knife guard it is parallel to the ground for the NOSE DOWN front when harvesting.

If your Harvester Fronts WORKING POSITION is PARALLEL to the Ground then the PINK single Extension Finger with the “-3” is suitable as it is horizontal or parallel to both the Adapt-A-Gap knife guard and the front.

 

Four Finger Knife Guard – FB Series

These Adapt-A-Gap four Finger knife guards are suitable from light crops of under 1.2 tonnes per Ha to the heavier crops of over 3 tonnes per Ha when using the Snap-On finger extensions.

Please contact us to see which knife guard will suit the dimensions of your knife and knife alignment – FB1, FB2 , FB3 or FB4 series knife guard (1.5″ centres)

fb40iso
fe50-wa

FE 50W-A

21mm gap using platform extenders for SORGHUM LUPINS, SOYBEANS, CHICKPEAS, FABA Beans and SHATTER-PRONE-crops when used with FB series knife guards (1.5″ centres)

Very useful for combing up wind or hail damaged or tangled crops.

These platform extenders have an adjustable angle allowing the tip of the extender to be raised or lowered to suit your front and your crop conditions

fe13

FE 13 or FE 13-3

13mm Gap Setting extensions for CEREALS 6 BAGS/ACRE 1.2 TONNES/Ha when used with FB series knife guards (1.5″ centres)

Fe13 is Blue, FE13-3 is Pink

fe13-17

FE 13/FE 17 or FE 13-3/FE 17-3

15mm Gap Setting alternate FE 13 (FE 13-3) with FE 17 (FE 17-3) extensions for CEREALS 6 – 9 BAGS/ACRE 1.2 – 1.8 TONNES/Ha when used with FB series knife guards (1.5″ centres)

fe17

FE 17 or FE 17-3

17mm Gap Setting FE 17 (FE 17-3) extensions for CEREALS 9 – 12 BAGS/ACRE
1.8 – 2.4 TONNES/Ha when used with FB series knife guards (1.5″ centres)

fe17-21

FE 17/FE 21 or  FE 17-3/FE 21-3

19mm Gap Setting alternate FE 17 (FE 17-3) with FE 21 (FE 21-3) extensions for CEREALS 12 – 15 BAGS/ACRE 2.4 – 3 TONNES/Ha when used with FB series knife guards (1.5″ centres)

fe21

FE 21 or FE 21-3

21mm Gap Setting FE 21 (FE 21-3) extensions for CEREALS OVER 15 BAGS/ACRE 0VER 3 TONNES/Ha when used with FB series knife guards (1.5″ centres)

Three Finger Knife Guard – FG Series

These Adapt-A-Gap Three Finger knife guards are suitable from light crops of under 1.2 tonnes per Ha to the heavier crops of over 3 tonnes per Ha when using the Snap-On finger extensions.

The bare knife guard has a 34mm gap.

Please contact us to see which knife guard will suit the dimensions of your knife and knife alignment – FG3, FG4 or FG5 series knife guard (2″ centres)

fg40iso
fe65-w-lone

FE 65W-A

32mm Gap Setting FE 65W-A platform extenders on FG series (2″ centre) knife guards for SORGHUM, LUPINS SOYBEANS, CHICKPEAS, FABA Beans and SHATTER-PRONE-crops.

Very useful for combing up wind or hail damaged or tangled crops.

fe13-fg-guards

FE 13 /FE 13-3

26mm Gap Setting FE 13 (FE 13-3) extensions for lighter crops when using FG series Knife Guards 10 – 13 BAGS/ACRE

fe30W

FE 30W / FE 30W-3

21mm Gap Setting FE 30W (FE 30W-3) extensions for lighter crops when using FG series Knife Guards 7 – 10 BAGS/ACRE

Two Finger Knife Guard – FD Series

These Adapt-A-Gap two finger knife guards are suitable for all crop densities especially medium to heavy crops and can utilise the FE95W metal sorghum finger or any of the plastic extension fingers such as the FE13, FE30W and Fe-Pickup ranges.  (3″ centres)

fd40iso
fe95-fd40-angled

FE 95W

FE-95W steel platform extender for the FD40 2 finger series of Knife Guards

Ideal for enhancing recovery of  Lupins or Sorghum.

fd40-fe30w

FE 30W/FE 30W-3

42mm Gap Setting for 2 Finger Knife Guards in Lighter Crops (3″ centres)

fd40

2 Finger Knife Guard

57mm Gap Setting for bare 2 – finger knife guard (3″ centres) for ALL Crops.

This video explains how the Adapt-A-Gap system work.

Plastic Extension Fingers

Plastic fingers extensions to suit Adapt-A-Gap Knife Guard System

p18-FE-PICKUP-1

FE Pickup-1

For pickup of Lentils, Peas and other ground hugging crops

Can be one per finger or spaced every 2nd or third finger to any one of our Adapt-A-Gap knife guard series.

p18-FE-PICKUP-2

FE Pickup-2

This light duty lifter is designed to pickup down or lodged crop and can be fitted to any of our Adapt-A-gap knife guard series.

Our single Finger Extensions have codes such as FE21 (narrow) FE17, FE13 (wider) and FE30W(widest) as displayed above.

The standard angle in Blue and raised at the nose whilst the horizontal fingers are Pink and have a “-3” in the code e.g. FE13-3.